Why use foil-faced insulation?

Kingspan Insulation: About Us; News; Planet Passionate

Products: Building Insulation; HVAC Ductwork Insulation

Services

General Enquiry

Technical Enquiry

Specification Enquiry

Connect with Us: LinkedIn; Facebook; YouTube; Instagram

Cookie Policy & Control Terms & Conditions of Website Use Website Privacy Notice Customer Privacy Statement

© 2026 Kingspan Holdings (IRL) Limited, All Rights Reserved

Why use foil-faced insulation?

Date Published

You may wonder why so many of our products are foil-faced; we explore why below.

Methods of Heat Transfer

In order to explain, firstly we need to look at how heat is transferred. There are three main methods:

• Convection

• Conduction

• Radiation

Heat loss from convection occurs through the movement of air and is limited by airtightness, suitable design and effective workmanship. Insulation works to prevent heat loss through conduction and materials chosen to make insulation have a low λ value or thermal conductivity. This means that they are good at preventing heat loss from conduction.

It is the last method of heat transfer – radiation – that is addressed by adding foil facings to the insulation.

Radiation

Radiation is the process by which heat is emitted from a body and transmitted across space as energy. Radiation does not require any intermediate medium such as air for its transfer; it can readily take place across a vacuum. The rate of radiation emission is governed by:

• The temperature difference between radiating and receiving surfaces;

• The distance between the surfaces; and

• The emissivity of the surfaces.

Emissivity is, in layman’s terms, how ‘shiny’ a surface is. In more technical terms, it is the relative ability of a surface to reflect radiation, defined in relation to a theoretically perfect black body.

A theoretical black body would have an emissivity of 1 and would not reflect any radiation, and a perfect reflector would have an emissivity of 0 and would reflect all radiant energy. The reflectivity of a material is directly inverse to the emissivity. The lower the emissivity, the better the material is at limiting radiative heat transfer as it reflects it. For example, for a material with an emissivity of 0.06, 94% of radiated heat would be reflected by it.

Foil is a low emissivity material

For a clear unventilated cavity, adding a low emissivity foil facing to at least one side of the cavity will improve, maybe even triple the thermal resistance. This means that adding a foil facing to insulation can significantly improve the U-value of the construction. This enables a thinner insulation to be used to achieve the same U-value.

Home
Why use foil-faced insulation?